Cnc lathe machine manufacturer 2023: Most CNC Swiss-style lathes today use one or two main spindles plus one or two back spindles (secondary spindles). The main spindle is used with the guide bushing for the main machining operations. The secondary spindle is located behind the part, aligned on the Z axis. In simple operation it picks up the part as it is cut off, and accepts it for second operations, then ejects it into a bin, eliminating the need to have an operator manually change each part, as is often the case with standard CNC turning centers. This makes them very efficient, as these machines are capable of fast cycle times, producing simple parts in one cycle (i.e., no need for a second machine to finish the part with second operations), in as little as 10–15 seconds. This makes them ideal for large production runs of small-diameter parts. See extra info on https://www.jsway-cnc.com/2-axis-lathe.
Motion is controlled along multiple axes, normally at least two (X and Y),[1] and a tool spindle that moves in the Z (depth). The position of the tool is driven by motors through a series of step-down gears in order to provide highly accurate movements, or in modern designs, direct-drive stepper motor or servo motors. Open-loop control works as long as the forces are kept small enough and speeds are not too great. On commercial metalworking machines closed loop controls are standard and required in order to provide the accuracy, speed, and repeatability demanded. As the controller hardware evolved, the mills themselves also evolved. As technology evolves, CNC lathe has been rapidly replacing older versions of lathes because of convenient use, easy installation & durability. Once the CNC machine has been pre-arranged, they can continuously driving parts with little supervision by the operator.
A Swiss-style lathe is a specific design of lathe providing extreme accuracy (sometimes holding tolerances as small as a few tenths of a thousandth of an inch—a few micrometers). A Swiss-style lathe holds the workpiece with both a collet and a guide bushing. The collet sits behind the guide bushing, and the tools sit in front of the guide bushing, holding stationary on the Z axis. To cut lengthwise along the part, the tools will move in and the material itself will move back and forth along the Z axis. This allows all the work to be done on the material near the guide bushing where it is more rigid, making them ideal for working on slender workpieces as the part is held firmly with little chance of deflection or vibration occurring. This style of lathe is commonly used under CNC control.
A 3-Axis CNC Machining Center/Mill is used for creating various industrial parts. This is achieved by using a wide-range of tooling and cutters depending on the type of material being cut and the end product being manufactured. CNC Vertical Machining Centers can include an additional axis to do specific cutting applications. Rotary Tables are common as a 4th Axis on mills. They can vary in size and weight capacities and can have a horizontal or vertical configuration. They are generally an add-on to a standard 3-axis mill. The mill will have to have a proper 4th axis interface (generally a 4th axis card, drive and CNC Control) to accept a 4th axis rotary table.
Advantages of vertical machining center/CNC VMC machine: The vertical machining center is convenient to install, easy to operate, easy to observe the processing situation, easy to debug the program, and widely used. The vertical machining center has good performance and high degree of automation. It can process special parts that are difficult or impossible to process on ordinary machine tools; Due to the simple structure of the vertical machining center, it is very easy to clamp the workpiece, and the clamping positioning and repeated positioning of the workpiece are very convenient. Read more information at https://www.jsway-cnc.com/.
Zhongshan JSTOMI CNC Machine Tool Co., Ltd., the main task is the development and production of high-precision multi-function CNC lathe machine, has a strong independent research and development capabilities. The main casting parts and steel parts of the machine tool are all machined and manufactured by the company’s machine shop, and the production capacity of self-made parts is good. The company has a perfect production management process, which guarantees the quality of the product.