Freshweld shopping in the UK 2025 with LEV Supply: Extraction hoods, or fume hoods, are ideal for robotic welding cells. These systems can also be used when welding is confined to a specific area. Plymovent FlexHoods are modular extraction hoods that can be ceiling mounted or held by standards. Extraction hoods will capture rising fumes and into your filtration system before they mix with your facility’s general atmosphere. Extraction hoods are common in facilities with robotic welding as part of their welding shop ventilation system. Strict rules and regulations exist to protect employees and ensure a safe working environment. A well-designed fume extraction system installed in your facility can help ensure you meet these requirements and regulations. Discover extra info on https://levsupply.co.uk/catalog/extraction-arms/oskar-flexible-hose-fume-extraction-arm/.
ESAB is a world leader in the production of welding and cutting equipment and consumables. Our innovative, world-renowned equipment and solutions are developed with input from our customers and built with the expertise and heritage of a global manufacturing leader. For each discipline, continuous development of methods, materials and know-how is being directed to meet the challenges posed by the diversity of industry sectors we serve. ESAB is organized to deliver efficient, high-productivity solutions to meet customer requirements in a manner that exceeds their expectations no matter the market segment. Continuous Improvement (Kaizen) Is Our Way Of Life – Set breakthrough objectives, experiment and learn every day, eliminate waste in our business processes, and benchmark the best, then better them. Living this value is done through understating that Change is a Must, and the use of Tools for Improvement. To live this value each ESAB associate fosters an environment of continuous learning employing the Colfax Business System Tools which is the basis of our culture.
These welding tables are manufactured to the highest standards in Poland, Europe by GPPH. GPPH’s range of welding benches and tables are laser cut for precision and are used in every branch of industry. These welding tables offer perfect flatness (+/- 0.5MM) & are made from 15MM thick S355J2+N grade steel. The hole system that these welding benches offer make precise construction a much quicker process when used in conjunction with the optional tool sets. Batch work processing times can be cut in half when you eliminate the measure and exact angle arrangement of individual parts – this makes producing the same item simple and fast.
Another quality machine from Hobart that has 25A for 190A output range so you can weld up to 5/16 in steel. The power input is only 230V so you won’t be able to use this on your standard household power outlet. The 190 is a wise choice if you’re considering buying a 140A welder but think you may want to upgrade in the future. It’s not much more expensive and you can always turn the 190 down but you can’t turn a 140 up. There’s loads including for the price, you get power, durability, a good duty cycle and all the extras you need to get started, including .030 contact tips, 0.30 flux cored wire and gas gauges. See the full review here.
Sealey is one of the biggest manufacturers of tools and accessories in the UK, offering approximately 8000 items including tools for home, repair shops, agricultural facilities, as well as cleaning. In this variety, we found a gasless MIG welder MIGHTYMIG 100. The machine is able to weld metal sheets of a different thickness thanks to a toggle that allows setting the amperage to the minimum and maximum. The output range will be 55? and 100?, respectively. We should say that the welding time at the minimum power won’t be over 6 minutes. Yet, this welder will run for about 2 minutes at 90? and that’s great considering its moderate price. In addition, you’ll be able to manage the joint by varying the speed of the wire feed, just turn the relevant control knob to the desired setting. By the way, the welder is compatible with a flux-cored wire up to 0.9 mm, and the weight of the spool should be 0.9 kg. Like most welding tools, it features an overheating protection, and the orange light will notify you when the welder gets overheated after a long use. Apart from that, the forced air cooling system will chill the welder’s internal parts. The welder has a non-live torch for your convenience that will increase the accuracy of welding and provide safety.
UK market look: LONGEVITY Inc is a company that has been around since only 2001. Like LOTOS Technology, it still produces a fine enough quality welder that it has earned its spot on this list. Besides the gas cylinder, this welder comes with everything you need to get started and is simple to set up. With all this, along with its solid performance, this machine is marked at a fair price of under $400. Though it is manufactured in China, the LONGEVITY Migweld is still a quality welder. It is most well-adapted to light use. Compared to Miller and Hobart’s machines, the price is somewhat better without sacrificing much quality. It welds from 24 gauge to ¼ inches of steel. Flux core is available for this welder. The LONGEVITY can run at ten different voltage settings. As an added bonus, it has thermal overload protection like the LOTOS welder.
Industrial gas cylinders have been around for a long time. They are widely used for welding, medical applications, fermenting liquids, and several other applications across various industries. In addition to these, new applications for these cylinders are emerging, as new industries and technologies are evolving. These cylinders are filled with low molecular weight chemicals in a gaseous form. Acetylene, oxygen, nitrogen, carbon dioxide, hydrogen, argon, and helium are some gases, which are used regularly. These chemical gases have distinct properties, which are exploited in various industrial applications. If not handled properly, these industrial gas cylinders may be hazardous in various industrial conditions. This post shares some important safety tips for handling industrial gas cylinders in an industrial facility.
The AHW machine uses the arc generated between two tungsten electrodes and the hydrogen gas provided by a hydrogen gas cylinder. It is known as atomic hydrogen welding because the arc separates the hydrogen into atomic form. These type of welding machines requires an experienced operator to operate this type of welder. This process is not used as much as GMAW and is slowly being replaced due to higher costs. AHW machines are used on thin and thick materials and are suitable for situations that require rapid welding. You may need a portable welder if the power source is relocated. It is either driven by an engine or works with an inverter.
Metal Inert Gas (MIG) and flux core wire-feed welders have completely revolutionized small-scale welding over the last couple of decades. Whether it’s hobbyists needing welders for DIY projects or professionals that deal with sheet metal on a daily basis, the modern MIG delivers an amazing impact on productivity. With the huge influx of Chinese and other foreign-built products on the market, prices are hovering at all-time lows. The biggest problem might actually be narrowing the huge selection down to the right machine at the right price. A professional welder needs quality and reliability above all else, while a DIY guy at home might be most concerned over the actual price of putting a MIG in the garage. We’ve put together a list of what we think are some of the best MIG welders available today along with reviews to help you choose.
Whether you’re a professional contractor or a DIY enthusiast and looking for a metal-cutting tool, this disc is a must-have. The cutting wheel is a great way to quickly cut through metal. With 52 wheels, you’ll always have one on hand. It is compatible with all 4-1/2 inch (115mm) angle grinders with 7/8 inch (22.2mm) arbor. The thickness of the wheel is 0.045 inch (1.2mm). You can operate this up to 13,300 RPM When it comes to precision and burr-free cutting, the Truswe Metal and Stainless Steel Cutting Wheel for Angle Grinder is tough to beat. This ultra-thin design delivers fast and accurate performance, with minimal material loss. The Metal Cutting Discs are made of aluminum oxide grains which are more safe than other wheel types. These discs should only be used when wearing all applicable safety gear because they can fly off the wheel and injure you if not careful. You should read the instructions before using this power tool. It is a heavy duty cutting disc that is fitted to any angle or side grinder. It will cut with ease through sheet metal, plastics, fiberglass, Plexiglas, ceramic tiles and even rubber.
One of the “cardinal sins” that almost every shop commits is over-welding. This means that if the drawing calls for a 1/4″ fillet weld, most shops will put down a 5/16″ weld. The reasons? Either they don’t have a fillet gauge and are not exactly sure of the size of the weld they are producing or they put in some extra to “cover” themselves and make sure there is enough weld metal in place. But, over-welding leads to tremendous consumable waste. Let’s look again at our example. For a 1/4″ fillet weld, the typical operator will use .129 lbs. per foot of weld metal. The 5/16″ weld requires .201 lbs. per foot of weld metal – a 56 percent increase in weld volume compared to what is really needed. Plus, you must take into account the additional labor necessary to put down a larger weld. Not only is the company paying for extra, wasted consumable material, a weld with more weld metal is more likely to have warpage and distortion because of the added heat input. It is recommended that every operator be given a fillet gauge to accurately produce the weld specified – and nothing more. In addition, changes in wire diameter may be used to eliminate over-welding.
LEV Supply presents a comprehensive range of mobile cassette and cartridge filters meticulously designed for welding, grinding, and cutting applications. These versatile mobile filters serve as indispensable tools, particularly in heavy industries, where smoke, fume, and dry dust pose significant challenges. Engineered to meet the demanding requirements of industrial environments, our mobile filters offer exceptional performance and reliability. Primarily utilised in heavy industry settings, our mobile filters are adept at effectively capturing and filtering airborne contaminants generated during welding, grinding, and cutting processes. Whether it’s the extraction of smoke from welding operations, the removal of fine dust particles from grinding activities, or the containment of fumes during cutting tasks, our mobile filters deliver superior filtration efficiency.
How to pick a welder tips: Digital meters factory fitted: Great to have when you purchase and may be required for calibration requirements. To fit them down the line could be expensive. Drive rollers: Metal rollers are the best. Nylon & plastic ones will always wear away quicker. Drive block system: Four roll would always be first choice, but some of the lower amperage machines won’t have them & two roll therefore would be acceptable. Bottle trolley: If you want a stepped voltage machine to be portable, you’ll need one. If you have a full size industrial cylinder check that the running gear & cylinder rack are man enough.
I’m a huge fan of Makita’s cordless LXT range. The DGA452Z is one of the best angle grinders available right now, and it’s a bit of a beast. The grip shape is nice and narrow, with comfortable rubberised overmoulding on the rear handle. Once you’ve installed a battery it’s well balanced and doesn’t feel too heavy at 1.3 kg without a battery installed. The Makita cordless grinder has a powerful brushless motor that’s efficient as well as powerful. It puts out a whopping 11,000 rpm, which is incredibly impressive for a cordless grinder. When you pair it up with a high Ah battery, it squeezes every last drop of power and runs for a surprisingly long time. It features a soft start function, battery gauge, and overload protection as well. There’s an anti-restart function for added safety between battery changes. One of the most impressive features must be the automatic speed control though. The internal computer controls the power output according to the load conditions, which makes for better cuts and longer tool life.
A few tips on welding equipment, MIG and TIG welders, plasma cutters. Welders with a higher power output can work with thicker metals, but higher voltage welders will require special power supply set ups—either generators or appropriate power outlets. A welder with lower voltage in the 100’s will not be able to handle heavy duty jobs, but it can be plugged in and operated from any outlet. Any welder with power over 200 cannot run off a typical power outlet and will naturally cost more to run. In addition, welders will either run an alternating current (AC) that reverses itself at regular intervals or a direct current (DC) that flows in one direction and does not reverse itself. DC offers a steady rate of energy that leads to hotter temperatures and deeper weld penetration. AC welders usually cost less than DC welders, but the available electrodes are far more limited for AC. In fact, DC welders are more costly but remain popular because their higher power offers a wider selection of electrodes and a number of working advantages such as: simple arc striking, better penetration, and improved control. Welders who expect to work on a wide variety of projects may want to consider an AC/DC combination welder.
106 CFM Airflow and 5800 RPM Motor Revolution. BAOSHISHAN fume extractor can generate 106 CFM airflow with 110V power and generates 55 dBA sounds. The motor revolution is at 5800 rpm, which is more than adequate to produce a decent fume extraction system. 3-stage Filter and 99.97% Purification. The device comes with a carbon filter, central HEPA, and cotton filter that ensure 99.97% purification. Harmful gases like hydrocarbons, benzene, hydrogen compounds, formaldehyde, and ammonia are successfully extracted by the BAOSHISHAN fume extractor. The machine can be categorized as the best portable weld fume extractor for DIY soldering, TIG and stick welding, and several other welding jobs.
Jancy Engineering slugger JHM series magnetic drill press is one of the best mag drill press for its versatile usages and compactness. This drill press power to weight ratio ideal for tight or high spaces. It has a no-load speed of 680 rpm, which is fast enough. It is also provided with a well-built stable platform and magnet circuity. This remains stable and supportive during job work. Jancy slugger JHM series magnetic drill press also includes case, coolant tank, safety strap, chip hook, centering pins, 5-millimeters hexagon wrench, safety guard.
Once you know how you’re going to be using your MIG welder, you’ll also need to think about what kind of weld you’re going to be doing. Consider the output of the machine that’s right for the kind of materials that you’ll be working with. The thicker the metal you work with, the more power you’re going to need in your MIG welder. Additionally, if a welder needs to use more than 100 volts, it will probably need a power supply. Ultimately, one of the main concerns that you’ll need to think about when choosing the right welder is how you’re going to make sure that your machine is safe and practical. There’s more to think about with a MIG welder than how you want the weld to look after you’re finished with it. However, if you’re looking for a clean finish, bear in mind that a Pulse MIG welder can reduce the risk of burning through your chosen metals.