Mil-spec connector manufacturer and supplier by MocoConnectors: Reliable Interconnectedness – In the case of military spec devices with critical safety concerns, special care should be taken to guarantee that the receptacle and plug are interconnected accurately. Capability to Bear Repeated Mating/Unmating Cycle – In some cases, connectors installed in patient’s monitoring equipment are mated and unmated frequently in a day during the lifetime of the connector. Therefore, in that case, you should confirm whether the connector can bear a repeated cycle of mating and unmating. Discover extra information on industrial connector.
In today’s advanced world, RF cables play an important role in keeping everyone connected. They ensure that the data is smoothly in flow between devices, powering everything from Wi-Fi connections to communications. However, as our need for faster, more accurate connectivity grows, so do our challenges. Conventional RF cables struggle to keep up with the demands of the latest technology. They face hurdles like interface issues, signal loss, and reliability concerns, putting the connections at risk.
RF cables connect RF connectors with coaxial ccables, like RG174,RG178,RG179,RG316,RG58 and etc. Professional features of RF connectors and rf cable assemblies: The product is small in size, reliable in performance and durable. Suitable for testing and accessories, also can be used in a variety of communications, consumer electronics, automotive and industrial equipment. Mechanical structure to ensure electrical characteristics, is a mechatronics products, and other low-frequency type connectors have essential differences. The parts are mainly processed by lathe, and there are many manual assembly operations, so it is difficult to carry out automatic assembly. It is an important part of electrical connectors, which belongs to labor intensive products with certain technical content.
MOCO RF connectors category includes BNC, SMA, SMB, SMC, SMP, MCX and MMCX connector series. Connectors for RF in this category will terminate to either coaxial cable, terminal or printed circuit board (PCB). MOCO RF connectors have built-in male, female, plugs, jacks, and sockets with 50 ohm or 75 ohm impedance.Our bnc rf connectors are available in Quick Disconnect (QD), Push-Up or Standard interfaces, as well as Straight, Radius Right Angle or Right Angle versions.We offer standard and precision performance level RF connectors in brass or stainless steel construction.
The sensor cables are used to supply power to and exchange signals with sensor and switches and it offered easier handling and space savings. Reliable, high-quality cables are available in a variety of connector styles, pole configurations and lengths to accommodate many panel and field wiring needs. You can find various sensor connector (M5, M8, M9, M12 sensor cable) and sensor cables here. Different cable sheathings (i.e. PVC, PUR, PUR Automotive, POC for welding areas), lengths, additional connection types (M23, 1/2″, 7/8”), UL approval, and optional sheathing colors enable individualized sensor cables. These tailor-made solutions are ideally suited to withstand the mechanical and chemical strain of your industrial application. Discover extra details on https://www.mococonnectors.com/.
MOCO Connectors is a top-rated push pull connector factory in China, producing quality connectors compatible and at par with other global brands’ connectors. Our push pull connectors are tested and certified by UL,CE and RoHS. MOCO’s push pull connectors feature the automatic push pull locking system design which is widely used in different industries. All of our circular push pull connectors are easy to use and mates safely, connects and disconnects quickly, and saves space.The standard brass contacts with gold plates over a nickel underplate design are found across our different series.They are available in solder,crimp,or PCB contacts.They are highly reliable and can endure over 96 hours of salt spray corrosion testing and more than 5000 mating cycles.
Insulation material: The insulation material must meet the electrical, temperature, and mechanical properties requirements. Generally, the insulation material is selected based on the electrical properties, working temperature, and mechanical and environmental requirements of the electrical connector. The electrical properties mainly depend on the dielectric properties and volume resistivity of the material, the operating temperature depends on the thermal deformation temperature of the material, and the mechanical properties depend on the impact strength and bending strength of the material. Common insulating materials include thermoplastics (such as polyamide, polyvinyl chloride, ABS, PTFE, polyester, polyphenyl ether, etc.) and thermosetting plastics (such as phenolic resin, urine formaldehyde, DAP, epoxy resin, etc.)
The material is durable enough to withstand high temperature, strong corrosion resistance, waterproof and moisture-proof, antibacterial, and the tail nut and the round nut of the socket are color-coded to prevent mis-insertion. Multi-key selection to avoid mixed insertion between similar connectors. In terms of pin configuration, we choose single-pin and multi-pin and electronic coaxial mixed pin configuration, which greatly saves panel space and insertion time for you. Instruments involved: monitor, ventilator, anesthesia machine, color Doppler, blood pressure detector, infrared therapy instrument, electrophysiology, CT, high-frequency electrosurgical knife, endoscope, defibrillator, dental scaler, electric shock devices, MRI machines, etc.
Push-pull self-locking connection is our main product, which we have continuously improved and optimized over the past ten years. It is generally divided into indoor and outdoor dedicated types, positioned by positioning pins. The B series connector is a basic model with a wide range of applications, affordable price and available with 2 to 32 cores. The K series connector is designed specifically for outdoor applications, with a protection level up to P68. In addition, multiple series of our products have 360° shielding to provide full-range EMC protection against electromagnetic interference.