High quality vehicle ignition coil supplier: Gasoline vehicles are usually powered by a simple 12-volt DC battery. This is enough voltage to engage a starter motor and get the engine turning, but it’s not enough for actual combustion. (A spark plug needs around 40,000 volts for combustion.) That’s where the ignition coil comes in. It contains a step-up transformer (also known as a coil pack) to convert that tiny current into quick bursts of several thousand volts at a time. This electricity is then sent to each spark plug in perfect time with the cylinder’s combustion cycle, igniting fuel vapor with oxygen and producing power. Diesel engines notably lack ignition coils because they ignite their fuel using heat and pressure alone. Find even more info on wholesale ignition coil.
Early cars came with one ignition coil. This coil pack was contained in a part called the distributor which was essentially a bundle of wires leading to each spark plug. The distributor was also responsible for timing each fuel ignition and could become de-calibrated over time, causing the engine to run out of sync. Around the 1980s, automakers began installing electronic sensors to handle ignition timing, and multiple ignition coils for better power and efficiency. Nowadays, most engines have an ignition coil placed directly on top of each spark plug. This is known as “coil on plug” configuration.
Principle of the ignition coil: It is composed of the main coil, a secondary coil, a magnetic core, a switching transistor and other auxiliary components. The main coil is charged by a battery, and the secondary coil is discharged by a spark plug to ignite, and the triode is responsible for switching. The charging time is controlled by the battery voltage and the engine speed to ensure that the energy is consistent each time. The ignition coil has two types: 3-wire and 4-wire. The 3-wire is the power supply positive, negative, switch control (ECU command), and the 4-wire has one more ignition detection. Wire can detect whether the spark plug is ignited (whether there is discharge current in the secondary coil). The quality of Haiyan car ignition coil/ automotive ignition coil is guaranteed.
The primary winding of an ignition coil will typically contain 150 to 300 turns of wire; the secondary winding will typically contain 15,000 to 30,000 turns of wire, or around 100 times more than the primary winding. The magnetic field is initially created when the vehicle’s electrical system applies approximately 12 volts to the ignition coil’s primary winding. When a spark is required at a spark plug, the ignition system will switch off the current flow to the primary winding, which will cause the magnetic field to collapse. The collapsing magnetic field will induce a voltage into the primary winding in the region of 200 volts; but the voltage induced into the secondary winding will be approximately 100 times greater, around 20,000 volts.
Using a changing magnetic field to induce an electric current: If a coil of wire is exposed to a magnetic field and the magnetic field then changes (or moves), it creates an electric current in the coil of wire. This process is known as ‘inductance’. This can be demonstrated simply by moving a permanent magnet across a coil. The movement or change in the magnetic field or magnetic flux induces an electric current into the coil wire. There are two main factors that affect how much voltage is induced into the coil: The faster the change (or speed of movement) of the magnetic field and the greater the change in the strength of the magnetic field, the greater the induced voltage. The greater the number of windings in the coil, the greater the induced voltage.
Haiyan engine coil wholesale manufacturer carries out strict quality monitoring and cost control on each production link of car coil, from raw material purchase, production and processing and finished product delivery to packaging and transportation. This effectively ensures the car coil of Haiyan ignition coil suppliers has better quality and a more favourable price than other products in the industry. The ignition coil wholesale manufacturer provide comprehensive and professional services such as design solutions and technical consultations based on the actual needs of customers. See even more info at https://www.hj-auto.com/.
Haiyan car ignition coil suppliers have 200 workers, around 170 work over 4 years, with an independent long-term workflow and productivity, have one department including 30 products technology development and research. Our automotive ignition coil manufacturers cover over 14000 square meters, have been awarded city contracts and keeping promises to units, also we certify ISO9001, and TS16949 for a quality system, truly achieving the quality first, reputation first quality service for our customers at home and abroad. Kindly welcome domestic and overseas patrons to come and guide.