Textile testing machines supplier China? GESTER is professionally engaged in manufacture and R&D of Textile Testing Equipment with 20+ years experience, including Fabrics tests, Yarn& Fibre tests, Color fastness tests, Flammability tests etc. Various in styles, GESTER instruments’s textile testing equipment can meet the needs of different customers.GESTER insists on the use of high-quality materials and advanced technology to manufacture textile testing instruments. Besides, we strictly monitor and control the quality and cost in each production process. All this guarantees the product to have high quality and favorable price.GESTER serves every customer with the standards of high efficiency, good quality, and rapid response. Read even more info on tensile testing machine.
With several modes of operation (spray, alternating light and dark, revolution), can simulate the real climate state. Individual timing of each sample clamp may enable different sample test in a same tester and facilitate test monitor and reduce operation cost. 7-inch color touch screen, various test monitor models(animation, figure and chart), simply operate, directly and clear. 1000 hours of continuous operations. Industrial grade microcontroller with strong antijamming capability. Xenon arc light fastness tester: 12 working positions monitoring, can set and inquire the irradiation energy. Possess fault prompt functions and self-diagnostic function.
Correct use of computerized universal testing machine: Make sure all wiring is correct before the tensile testing machine is operated and preheat for at least 15 minutes to package the stability of the sensor. According to the test, the position of the upper and lower limit blocks is reasonably set to prevent the instrument from running over the stroke and causing damage to the fixture and the sample. When pressing the fast up button or the fast down button, do not put your hand between the moving beam and the fixed specimen, fixture or test device to avoid injury.
This bursting strength tester use pneumatic method, meet multinational standards and equipped with several changeable test clamp. The simple interface touching screen controller is easy and simple to handle. The specimen was clamped firmly by the pneumatic force which can also save effort. The test cover was made up of high-transparent glass with LED light inside which can observe the specimen easily. The Bursting Strength Testing Machine can induct the burst automatically which is much more sensitive and reliable. The bursting distension can go up to 75mm.
Reagent Preparation: Prepare corresponding reagents according to different test standards and keep them as standby. If sodium perborate is required in the test, the preheating temperature shall not exceed 60℃ when preparing the solution, and it shall be used within 30 minutes at most to prevent the loss of oxidant. Solution Warm-up: Put the specified volume of solution and a specified number of steel balls into the stainless steel cup, put the stainless steel cup into the launderometer for a few minutes, preheat to the specified temperature. Then put in the prepared sample for test. Read additional details on gesterinstruments.com.
The values stated in SI units are to be regarded as the standard, with the exception of mils when determining coating thickness.Test Procedure: The haze or original weight of test specimen is measured. The test specimen is then placed on the taber wear and abrasion tester. A 250, 500, or 1000-gram load is placed on top of the abrader wheel and allowed to spin for a specified number of revolutions. Different abrading wheels are specified. A haze measurement or final weight is taken. The load and wheel can be adjusted for softer and harder materials.