Taper roller Bearing manufacturer and supplier in China? Needle bearing with fine and long roller,so the radial structure is compact,its diameter and load capacity at the same time,with other types of bearing outside diameter to a minimum,especially suitable for the limited size of the radial installation supporting results. Needle roller bearing capacity big,applicable to the limited size of installation supporting structure,the journal as rolling surface hardening on the surface,bearing force fit in a hole,not for axial positioning.Needle roller bearing according to the use of different occasions,the machining accuracy and surface quality should be combined with bearing ring,use.Needle roller bearing is a centripetal needle bearing and thrust bearing parts of the bearing unit. Discover additional information at double taper roller bearing.
Ball screw pair is to convert rotary motion to linear motion, or convert linear motion into rotary motion of the ideal product.Ball screw pair by screw, nut, reverse gear and ball bearing, ball screw pair is the function of rotary motion into linear motion, or convert torque into axial force repeatedly, at the same time combines the characteristics of high accuracy, reversibility and high efficiency. Ball screw pair with high accuracy, reversibility and high efficiency etc., this is the further extension and development of the trapezoidal screw, the significance of the development is the trapezoidal screw sliding action into a rolling action.
Oilless bearing is a kind of both metal bearing characteristics and bearing characteristics of novel lubrication bearing lubrication system, the load matrix, and the special formula of solid lubricating materials lubrication.It has high bearing capacity, impact resistance, high temperature resistant, self-lubricating ability etc., especially suitable for overloading, low-speed, reciprocating or swing, difficult to lubrication and oil film formation, not afraid of the water and other acid erosion and erosion.
One-way bearing is free to rotate in a direction, and locked in another direction of a bearing.One-way bearing is also called the overrunning clutch, just according to different industries, the effect is different.One-way bearing metal shell, contains a number of roller, needle or ball, and the rolling (hole) of the shape that it can only scroll in one direction, while in another direction will produce very big resistance (the so-called “one-way”). Powder metallurgy one-way bearing by moulding and sintering process the metal powder (or the mixture of metal powder and nonmetal powder) made products of technology.In the study of the characteristics of powder and process variation characteristics, on the basis of the corresponding technical process, changing the shape of powder, performance, and their organization structure as to adapt to the different needs of bearing products. Discover additional information at wxingbearing.com.
Slewing ring bearings generally installed with a hole in the gears or gear, grease holes and sealing device, which enable mainframe design compact structure, and guide is simple, easy to maintain.Slewing bearing presence of tooth, tooth and tooth in the four-point contact ball bearing, double row angular contact ball bearing, crossed cylindrical roller bearing, crossed tapered roller bearing and three composite bearings, four row cylindrical roller series, including four-point contact ball bearing has high static load capacity, crossed cylindrical roller with high load capacity, preloaded can make crossed tapered roller bearing bearing has great support stiffness and the rotation accuracy, three rows of cylindrical roller bearing combination height because of the increase to the bearing capacity of bearing, all kinds of power respectively by different race to bear, so under the same stress distribution, the bearing diameter can be significantly reduced, thus make the characteristics of the host more compact is a kind of high bearing capacity of slewing ring bearings.Slewing bearings are widely used in hoisting machinery, mining machinery, construction machinery, port machinery, ship machinery and mechanical precision radar and missile launcher equipment such as large rotary device.At the same time also can according to customer’s specific requirements of the design, development, production various special slewing bearing structure.
Bearing ring (especially the outer ring) under alternating load and impact load, the stress it bears constantly exceeds the fatigue strength limit of the material, leading to the fatigue crack, and the crack eventually expands to a certain extent, leading to the fracture at the maximum stress of the parts.Generally occurs in the bearing area of the outer ring of the bearing, because the outer ring usually fits with the bearing box hole for clearance, and the bearing box body is a variable and elliptical part, which is easy to cause fatigue fracture under alternating load and impact load. Similar to fatigue fracture, when the stress on the bearing is greater than the tensile strength of the material, the inner ring cracks, usually due to improper installation, such as bearing installation tilt, resulting in partial load of the bearing, resulting in partial overload of the bearing caused by fracture;In addition, improper striking during installation caused bearing cracking and falling blocks, which is also classified as overload cracking.Most common interference when installation, and bearing fit size can also lead to large amount of interference of bearing ring crack (mainly has four row cylindrical bearing inner ring interference fit), interference is too big lead to inner ring stress is larger, especially thin cross section thickness (thickness of section < 12 mm) of inner ring, too much interference often leads to inner ring axial crack.
As a technology pioneered by developed countries such as the United Kingdom, self-lubricating bearings are naturally the same as high-end technologies in other manufacturing fields, which have imposed a technical blockade on my country. For a long period of time, my country has to pay no small price in the face of self-lubricating bearings. In this regard, He Liangjia, the head of Fujian Longxi Bearing, said: Foreigners can, but why can’t China? There is nothing impossible in this world. Under this belief, the research team of China Bearings started the research work on self-lubricating bearings without any equipment support and theoretical and technical foundation.