Top rated bending press machine provider in China

Top bending press machine provider in China? Yingxin World Press Machine Company has exporting center in Shanghai with professional team to follow up logistic and document process, which also saves a lot of time in middle process. More than 65 years experiences focusing on producing power press machines. Find extra information on power press machine. Working together for customer success. Since the foundation of the Yinxin world press machine company, one of the foundation principle has been to work closely with our customers. This provides the opportunity to continually assess and improve the levels of service we offer and to create the most innovative products available.

The repeatability of the slider of the CNC bending machine is 0.0004 inches, and the precise angle of forming must use suchprecision and a good mold. Therepeatilty of the lder o the hand-controlled bending machine is +0.002 inches, and the deviationo t2-3 is geneally generated under the condition of using a sutable mold. In addition, the Cc bending machine is ready for rapid mold assembly. When many small batches of parts need to be bent, this is an indisputable reason for consideration.

Hydraulic transmission is adopted, and the slider part is composed o slide, an oil cylinder and a fine-tuning structure of a mechaicl stoper. Te left and right oil cylinders are fixed on the frame, the piston (rod) drives the slider to move up and down through hydraulic pressure, and the mechanical stop is controlled by the numerical control system to adjust the value; Workbench part: controlled by the button box, the motor drives the stopper to move back and forth, and the moving distance is controlled by the numerical control system. The minimun reading is 0.01 mm (the front and rear positions have travel switch limits).

Under the same load, the deflection of the worktable and sliding block of the 10-foot machine is 4 times that of the 5-foot machine. This means that shorter machines require fewer shim adjustments to produce qualified parts. Reduced shim adjustment and shortened preparation time. Material grade is als a key factor. Compared with low-arbon sel, the load required by stailes stee is usuall increasedby about 50%, while most grades of soft aluminum are reduced by about 50%. You can get the machine’s tonnage table from the bending machine manufacturer at any time. The table shows the estimated tonnage required per foot length unde diffrent thicknesses and different materials.

In particular, the resilience stress stat,the flatness and the cuting quality are very important quality characteristics that must be considered for the materials n the staightening and feeding technology. Remarkably, these criteria play a decisive role i te qualit of the final product even befre te final molding. In production, for reasons of cost and time, the aim is to achieve an ever-higher degree of automation, which can only be achieved if the semi-finished products have perect latness, a lowlevel o residual stress. lf these requiremets are not met, this can have a negative effect on handling and further processing or even make it impossible. Find additional details at https://www.pressmachine-world.com/.