Pcb manufacturer right now? As a professional PCB manufacturer and with more than 15 years’ rich experience in PCB manufacturing, A-TECH is capable of manufacturing various PCB types, include: single-sided PCB, double-sided PCB, multilayer PCB up to 30 layers, Aluminum PCB, flexible PCB, Rigid-flex PCB, HDI PCB, Microwave RF PCB etc. We’re skilled in different special pcb technology, include: thick copper PCB, Hybrid PCB, PCB edge plating, Via In Pad(Resin Plugged), Countersink & Countersunk, Half plated hole, press fit hole, control depth routing, impedance control. We can also meet different demands of PCB surface finish, include: HASL, HAL(Lead free), Immersion gold/Tin/silver, hard gold plated, gold fingers, OSP, Peelable mask, carbon ink etc. We have HASL, HAL(Lead free), Immersion gold and OSP surface finish in house to meet majority PCB demands with ripid delivery. Discover more info on pcb prototype assembly.
Our automated X-Ray inspection systems are able to monitor a variety of aspects of a printed circuit board in assembly production. The inspection is done after the soldering process to monitor defects in soldering quality. Our equipment is able to “see” solder joints that are under packages such as BGA, CSP and FLIP chips where the solder joints are hidden. This allows us to verify that the assembly is done correctly. The defects and other information detected by the inspection system can be quickly analyzed and the process altered to reduce the defects and improve the quality of the final products. In this way not only are actual faults detectd, but the process can be altered to reduce the fault levels on the boards coming through. Use of this equipment allows us to ensure that the highest standards are maintained in our assembly.
Advantage of MCPCB: Some LEDs dissipate between 2-5W of heat and failures occur when the heat from a LED is not properly removed; a LED’s light output is reduced as well as degradation when the heat remains stagnant in the LED package. The purpose of a MCPCB is to efficiently remove the heat from all topical IC’s (not just LEDs). The aluminum base and thermally conductive dielectric layer act as bridges between the IC’s and heat sink. One single heat sink is mounted directly to the aluminum base eliminating the need for multiple heat sinks on top of the surface mounted components.
Tg means Glass Transition Temperature. As flammability of printed circuit board (PCB) is V-0 (UL 94-V0), so if the temperature exceeds designated Tg value, the board will changed from glassy state to rubbery state and then the function of PCB will be affected. If working temperature of your product is higher than normal (130-140C), then have to use High Tg PCB material which is > 170C. and popular PCB high value are 170C, 175C, and 180C. Normally the FR4 circuit board Tg value should be at least 10-20C higher than working temperature of product. If you 130TG board, working temperature will be lower than 110C; if use 170 high TG board, then maximum working temperature should be lower than 150C.
There are total 420 highly trained full-time employees with land area 30000 square meters and building area 18000 square meters in our PCB plant, we mainly focus on high-mix, low to medium volume pcb fabrication as well as quick turn pcb prototype to meet 24 hours delivery for double sided PCB, 48 hours for 4 to 6 layers and 72 hours for 8 or more high multilayer PCB at the fastest. The production capacity is 25000 square meters and more than 3000 varieties per month, the printed circuit boards we manufactured are widely used for different electronics industries, such as telecommunication, consumer electronics, computer, medical, automotives, military and so on, more than 60% of our PCB board are exported to Europe, North America and other Asian countries. Find extra info at https://www.atechpcb.com/.